设为首页收藏本站业务合作小R机器人在线课程中心
开启辅助访问 切换到窄版

小R科技-WIFI机器人网·机器人创意工作室

 找回密码
 立即注册
小R科技-WIFI机器人网·机器人创意工作室»论坛 › 模型编程技术交流区 › 智能车/机器人下位机及单片机技术交流区 › 求高手703N挂301摄像头
返回列表 发新帖
查看: 10539|回复: 9

求高手703N挂301摄像头

[复制链接]
duocoo
发表于 2012-5-2 23:03:49 | 显示全部楼层 |阅读模式
703N刷openwrt_withallsoftware(703N专用).bin固件，就第一次刷机曾挂上去一次后视频卡死后就无法挂上，DEV目录下不能生产video0文件，我把启动信息放上，那位高高人帮忙看看，也搞了一个星期，万分感谢。

Sep  8 15:54:07 OpenWrt kern.info kernel: [   11.440000] usbcore: registered new interface driver usbfs
Sep  8 15:54:07 OpenWrt kern.info kernel: [   11.450000] usbcore: registered new interface driver hub
Sep  8 15:54:07 OpenWrt kern.info kernel: [   11.460000] usbcore: registered new device driver usb
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.530000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.540000] ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.550000] ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.580000] ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.600000] ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.600000] hub 1-0:1.0: USB hub found
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.600000] hub 1-0:1.0: 1 port detected
Sep  8 15:54:07 OpenWrt kern.info kernel: [   13.710000] nf_conntrack version 0.5.0 (461 buckets, 1844 max)
Sep  8 15:54:07 OpenWrt kern.info kernel: [   14.300000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 15:54:07 OpenWrt kern.info kernel: [   14.430000] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 15:54:07 OpenWrt kern.info kernel: [   14.460000] i2c /dev entries driver
Sep  8 15:54:07 OpenWrt kern.info kernel: [   14.580000] Linux video capture interface: v2.00
Sep  8 15:54:07 OpenWrt kern.info kernel: [   14.890000] cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.0
Sep  8 15:54:07 OpenWrt kern.info kernel: [   14.900000] usbcore: registered new interface driver cpia2
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.030000] gspca: v2.12.0 registered
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.150000] pwc: Philips webcam module version 10.0.14 loaded.
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.160000] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.170000] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.170000] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.180000] usbcore: registered new interface driver Philips webcam
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.210000] usbcore: registered new interface driver conex
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.230000] usbcore: registered new interface driver etoms
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.260000] usbcore: registered new interface driver finepix
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.290000] usbcore: registered new interface driver ALi m5602
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.310000] usbcore: registered new interface driver mars
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.340000] usbcore: registered new interface driver mr97310a
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.370000] usbcore: registered new interface driver ov519
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.390000] usbcore: registered new interface driver ov534
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.420000] usbcore: registered new interface driver pac207
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.590000] usbcore: registered new interface driver pac7311
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.620000] usbcore: registered new interface driver sonixb
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.640000] usbcore: registered new interface driver sonixj
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.670000] usbcore: registered new interface driver spca500
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.690000] usbcore: registered new interface driver spca501
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.720000] usbcore: registered new interface driver spca505
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.740000] usbcore: registered new interface driver spca506
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.750000] spca506: registered
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.770000] usbcore: registered new interface driver spca508
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.800000] usbcore: registered new interface driver spca561
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.820000] usbcore: registered new interface driver sq905
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.850000] usbcore: registered new interface driver sq905c
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.880000] usbcore: registered new interface driver stk014
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.910000] usbcore: registered new interface driver STV06xx
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.930000] usbcore: registered new interface driver sunplus
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.960000] usbcore: registered new interface driver t613
Sep  8 15:54:07 OpenWrt kern.info kernel: [   15.980000] usbcore: registered new interface driver tv8532
Sep  8 15:54:07 OpenWrt kern.info kernel: [   16.100000] usbcore: registered new interface driver vc032x
Sep  8 15:54:07 OpenWrt kern.info kernel: [   16.130000] usbcore: registered new interface driver zc3xx
Sep  8 15:54:07 OpenWrt kern.info kernel: [   16.280000] usbcore: registered new interface driver uvcvideo
Sep  8 15:54:07 OpenWrt kern.info kernel: [   16.290000] USB Video Class driver (v1.0.0)
Sep  8 15:54:07 OpenWrt user.notice ifup: Enabling Router Solicitations on loopback (lo)
Sep  8 15:54:07 OpenWrt kern.info kernel: [   17.570000] device eth0 entered promiscuous mode
Sep  8 15:54:09 OpenWrt kern.info kernel: [   19.060000] device wlan0 entered promiscuous mode
Sep  8 15:54:09 OpenWrt kern.info kernel: [   19.060000] br-lan: port 2(wlan0) entering forwarding state
Sep  8 15:54:09 OpenWrt kern.info kernel: [   19.060000] br-lan: port 2(wlan0) entering forwarding state
Sep  8 15:54:09 OpenWrt user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Sep  8 15:54:11 OpenWrt kern.info kernel: [   21.250000] device wlan0 left promiscuous mode
Sep  8 15:54:11 OpenWrt kern.info kernel: [   21.250000] br-lan: port 2(wlan0) entering forwarding state
Sep  8 15:54:11 OpenWrt kern.info kernel: [   21.390000] device wlan0 entered promiscuous mode
Sep  8 15:54:11 OpenWrt kern.info kernel: [   21.390000] br-lan: port 2(wlan0) entering forwarding state
Sep  8 15:54:11 OpenWrt kern.info kernel: [   21.400000] br-lan: port 2(wlan0) entering forwarding state
Sep  8 15:54:20 OpenWrt kern.info kernel: [   29.780000] usbcore: deregistering interface driver zc3xx
Sep  8 15:54:22 OpenWrt kern.info kernel: [   31.810000] usbcore: registered new interface driver zc3xx
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1206]: starting application
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1206]: enabling daemon mode
Sep  8 15:54:27 OpenWrt user.info sysinit: enabling daemon modeforked to background (1209)
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1209]: MJPG Streamer Version: svn rev: exported
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1209]: Using V4L2 device.: /dev/video0
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1209]: Desired Resolution: 640 x 480
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1209]: Frames Per Second.: 30
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1209]: Format............: MJPEG
Sep  8 15:54:27 OpenWrt user.info MJPG-streamer [1209]: init_VideoIn failed
Sep  8 15:54:27 OpenWrt daemon.notice ser2net[1208]: ser2net startup


配置文件如下
#!/bin/sh /etc/rc.common
START=80

video_mod=gspca_zc3xx
#video_mod=gspca_ov519
start() {
        rmmod $video_mod > /dev/null 2>&1 && sleep 2
       insmod $video_mod > /dev/null 2>&1 && sleep 5
       mjpg_streamer -b -i "input_uvc.so -r 640x480 -f 30"  -o "output_http.so -p 8080 -w /web"
     ser2net -c /etc/ser2net.conf
}
stop(){
    killall mjpg_streamer
     killall ser2net
}
回复

使用道具 举报

liuviking
发表于 2012-5-2 23:17:22 | 显示全部楼层
init_VideoIn failed
这句说明初始化视频就失败了。估计是UVC的摄像头吧？试试UVC的启动配置文件。
回复 支持 反对

使用道具 举报

duocoo
 楼主| 发表于 2012-5-2 23:24:36 | 显示全部楼层
就是改成这样？
#video_mod=gspca_zc3xx
video_mod=gspca_ov519
回复 支持 反对

使用道具 举报

duocoo
 楼主| 发表于 2012-5-3 00:40:02 | 显示全部楼层
我换了个摄像头，提示的意思好像是说USB1.1上枚举不成功，而插上另外一个就什么也不提示，我测了下我的703的USB口输出电压只有2V多一点，是不是电压不够，U口应该是5V才对啊（两个摄像头在电脑上都可以用）
回复 支持 反对

使用道具 举报

duocoo
 楼主| 发表于 2012-5-3 11:37:17 | 显示全部楼层
初步判断应该是U口供电的问题，换个电源试试后再来报告。
回复 支持 反对

使用道具 举报

duocoo
 楼主| 发表于 2012-5-3 17:43:18 | 显示全部楼层
为何我用电脑的USB给供电，路由U口输出还是2.2V列，难道我的这个有问题？我的是1.5版的
回复 支持 反对

使用道具 举报

liuviking
发表于 2012-5-3 19:53:58 | 显示全部楼层
USB口只有2V的话肯定是不正常的，估计和板子的版本有关。
回复 支持 反对

使用道具 举报

duocoo
 楼主| 发表于 2012-5-4 00:34:08 | 显示全部楼层
看来又挂了一个路由啊，我的DB120，703都挂了，再搞个什么列，迅捷FWR171-3G 150M 现在怎么样？
回复 支持 反对

使用道具 举报

笨笨
发表于 2012-6-24 10:31:45 | 显示全部楼层
刷新路由器的固件尝试尝试,供电电压低的确是跟路由器的版本有关.
回复 支持 反对

使用道具 举报

爱上飞翔
发表于 2012-8-24 10:10:29 | 显示全部楼层
学习下哦 好东西
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

新品特惠推荐上一条 /2 下一条

QQ|QQ技术咨询1|QQ技术咨询2|商务合作微信1：xiaorgeek001|商务合作微信2:XiaoRGEEK|诚聘英才|Archiver|手机版|小R科技-WIFI机器人网·机器人创意工作室 ( 粤ICP备15000788号-6 )

GMT+8, 2024-11-23 05:36 , Processed in 1.125962 second(s), 19 queries .

Powered by XiaoR GEEK X3.4

© 2014-2021 XiaoR GEEK

快速回复 返回顶部 返回列表