路由重启摄像头就没有了，求救

ksac2008

路由重启摄像头就没有了，还得从新写一遍这个（mjpg_streamer -i "input_uvc.so -y -f 15 -r 320*240 -q 50 -d /dev/video0"
-o "output_http.so -p 8080 -w /www/camwww"&），


root@DreamBox:~# mjpg_streamer -i "input_uvc.so -y -f 15 -r 320*240 -q 50 -d /dev/video0"
-o "output_http.so -p 8080 -w /www/camwww"&
root@DreamBox:~# MJPG Streamer Version: svn rev: exported
i: Using V4L2 device.: /dev/video0
i: Desired Resolution: 320 x 240
i: Frames Per Second.: 15
i: Format............: YUV
i: JPEG Quality......: 50
Adding control for Pan (relative)
Adding control for Tilt (relative)
Adding control for Pan Reset
Adding control for Tilt Reset
Adding control for Pan/tilt Reset
Adding control for Focus (absolute)
mapping control for Pan (relative)
mapping control for Tilt (relative)
mapping control for Pan Reset
mapping control for Tilt Reset
mapping control for Pan/tilt Reset
mapping control for Focus (absolute)
mapping control for LED1 Mode
mapping control for LED1 Frequency
mapping control for Disable video processing
mapping control for Raw bits per pixel
o: www-folder-path...: /www/camwww/
o: HTTP TCP port.....: 8080
o: username:password.: disabled
o: commands..........: enabled

ksac2008

发现这个任务没有启动，（mjpg_streamer -i input_uvc.so -y -f 1  ）如何改成自己启动

liuviking

请参考这篇帖子，加一个启动脚本：http://www.wifi-robots.com/thread-49-1-1.html

零用钱

其实认真看一下路由器里面的设置    是可以找到摄像头的启动的