WIFI/蓝牙智能小车机器人操控平台正式版V2.0发布

cxzmn01 · 发表于 2015-8-20 19:16:16

还没用，先下来准备好

leo9999neo · 发表于 2015-8-24 00:04:16

严重支持老板大公无私的精神

ctxx61 · 发表于 2015-8-25 16:04:11

将车灯发送指令改为 51单片机版WIFI小车下位机程序（通信协议版）http://www.wifi-robots.com/thread-10-1-1.html的FF0201FF 和FF0202FF 无论如何按都没有反应？然后装老的703N驱动还能看到视频但是装新的驱动就看不到视频还会无法连接

mihaifireball · 发表于 2015-9-8 00:06:55

本帖最后由 mihaifireball 于 2015-9-8 01:53 编辑

As I understood, virtual remote control (IR transmit) and lights are using the same port (P22)? It means that you can not use both at the same time?
Where I can find more info about how to connect and use the sensors(temperature, humidity, gas.... etc) with 51duino board?